Printing rubber roller repair

In the work process, the printing rubber roller usually rises, wears, and holes. If the new roller is replaced, the cost is too high and the production progress is affected. It can be repaired with a rubber repair agent.

For the repair process, take the BD916 rubber repair agent produced by Xiangfan Lianji Adhesive Factory as an example:

1. Surface treatment: Touch the hair to be repaired, clean, decontaminate, degrease, and dry.

2. With the glue repair, pour the rubber repair agent curing agent group B into the iron of the main agent group A and quickly stir the average (A: B = 1:1), then pour it into the area to be repaired.

3. Curing: It can be used for 4-6 hours at room temperature and reaches the maximum strength in 48 hours.