Rubber roller installation method

After purchasing the rubber roller, is it not clear about the installation? Therefore, we are now introducing a correct process for installing the rubber roller, in order to facilitate the installation of your own rubber roller.

1. Clean the impurities at both ends of the new rubber roller, and then select the bearings whose specifications and models meet the design requirements, apply the lubricating oil on each mating surface, and beat the special bearing sleeve correctly and evenly until the bearing is installed in place. . Do not directly apply force to the bearing, and feel free to knock to prevent the bearing from being damaged before it is used.

2. Ensure the lubrication of each bearing and shaft seat of the rubber roller. Before the rubber roller is installed, the outer surface of the rubber roller and the rubber roller bearing sleeve and bracket on the machine should be coated with lubricating grease to minimize the rotation, impact and friction formed by the back and forth of the ink roller. Reduce wear on both sides of the rubber sleeve and the shaft seat.