Patch film machine rubber roller

Stable temperature and humidity are the key to spinning production and quality control. Textile enterprises have strict control standards for temperature and humidity control, but few textile companies pay attention to rubber roller aprons to treat room temperature humidity environment. , spinning management, the impact of spinning quality. The rubber roller apron processing chamber of many textile enterprises is far from the temperature and humidity of the spinning workshop. During the rubber ring apron processing and storage process, the rubber roller apron rapidly relaxes or contracts due to temperature changes. The relaxation of the rubber roller apron does not affect the application and service life of the rubber roller apron. When the temperature of the rubber roller apron chamber is lower than 20 °C, the shrinkage of the rubber roller apron will cause entanglement during the use of the rubber roller apron. Deformation, cracking, cracking, shedding, shortening the service life of rubber roller aprons. Similarly, the relative humidity of the rubber roller apron processing chamber is less than 20%, which will cause a large static electricity in the rubber roller apron and a rubber ring around the rubber roller; when the relative humidity of the rubber roller apron processing chamber is greater than 65% Due to the enhanced hygroscopicity of the surface of the rubber roller, the rubber roller apron is in a dehumidifying state during the spinning process, and the adsorption of the fiber is generated, and a large-area winding roller and rubber roller apron appear, which seriously affects the spinning. The smooth progress of yarn production has caused fluctuations in the physical indexes of the yarns and a large increase in the number of yarn defects. The temperature of the rubber roller apron treatment chamber is controlled at 20 °C ~ 36 °C, and the relative humidity is controlled at 20%-65%, which is beneficial to the processing and storage of the rubber roller apron, and is also beneficial to the rubber roller apron after treatment. Adapt to the temperature and humidity of the textile production workshop in a short time to ensure stable production.

In addition to temperature and humidity, water, oil, and paint also have an effect on rubber roller apron treatment. Usually, we will find that after cleaning the rubber roller apron, a large amount of water or water will appear on the surface of the rubber roller apron and the bearing, and it will be dried or dried in a certain period of time to prevent the product of the rubber roller apron. Rusting of water or bearings. During the rubber roller apron treatment, the rubber roller bearing should be refueled. Due to the influence of human factors or grease factors, the rubber roller bearing oil leakage and oil flow often occur, even if the convection oil and oil leakage are simply processed, In the spinning process, a large amount of oil splash and flow leakage will occur due to the high speed operation of the rubber roller, resulting in pollution roller, rubber roller apron, spinning up and down pin and yarn, winding roller and rubber roller apron. It will often appear, and the oil will penetrate into the rubber ring and it will be difficult to clean. The use of coatings in rubber roller apron chambers, in textile enterprises with relatively poor environmental and processing techniques, is prone to uneven coating on the surface of rubber rollers, paint shedding, and paint contamination of yarns, resulting in spinning management and spinning quality. Serious harm. Therefore, the rubber roller apron processing chamber must strictly implement the clean, fresh and consistent standard principle. The rubber roller tray, the apron container and the rubber roller apron storage container of the rubber roller apron processing chamber must be clean and clean to ensure no oil, Rust, hair, dust.

SMD film machine rubber roller 丨 film machine rubber roller 丨 SMT machine rubber roller